Future heating systems should improve experiences, be simpler to install and provide consumers with enhanced control if the challenge of decarbonising domestic heat is to be met – ETI report
10 November 2015
11th November 2015
Future low carbon heating systems should improve the heat experience, be simpler to install and provide consumers with enhanced control if the UK is to meet the challenge of dramatically reducing emissions from domestic heating, according to a new report published by the Energy Technologies Institute (ETI).
Heat accounts for more than 40% of the UK’s total energy demand and heating the UK’s buildings contributes roughly 20% of overall UK CO2 emissions. But today fewer than 4% of households have low carbon heating and 90% prefer gas central heating when given the choice so low carbon systems need improving.
“Consumer Challenges for Low Carbon Heat,” written by Matthew Lipson, the Head of Consumer Insight at the Energy Systems Catapult – who are delivering the ETI’s Smart Systems and Heat (SSH) programme – is based on an extensive ETI consumer research project which has highlighted a number of issues the UK has to address if it is to change how it heats the majority of its buildings.
In the UK location constrains the heating solutions available to each building, existing buildings also have their own constraints and many homes will need modifying to make sure solutions work well. Alongside this, people are diverse and ETI’s research shows they are concerned about different things – for example cost, comfort, or health – and therefore the same solution will not suit everyone.
From this research three key consumer challenges for any transition to low carbon heating have been identified.
Matthew Lipson said:
“The UK will need to all but eliminate emissions from domestic heating if it is to meet its carbon targets. Previous measures to reduce emissions have been relatively simple, cheap and delivered benefits but the options currently available to make further step-change reductions would require households to endure more disruption for less obvious benefits.
“We need to develop ways of reducing emissions from domestic heating that are more appealing to consumers so the transition to low carbon heating on a large scale is much easier to deliver in practice.
“Any solutions will need to be underpinned by sound engineering; high quality design; appropriate technical, consumer and economic regulation; and financially viable business models. But ultimately they will need to be appealing, simple to install and easy to control.”
The Energy Systems Catapult will deliver phase one of the SSH programme as a supplier to the ETI following the transition of the SSH programme team to the Catapult. From 2017 the Catapult will be responsible for delivery of phase two of the programme independently of the ETI.
More details on the Consumer Challenges for Low Carbon Heat Insight, including the report, video and infographics are available here
- ETI consumer research highlights a number of issues to overcome if the UK is to decarbonise domestic heating by converting 30 million homes to lower carbon heating by 2050
- Low carbon heating should improve heating experiences, be simpler to install and provide people with enhanced control
- People are diverse, they want different things from their heating – so the same solution will not suit everyone
Future low carbon heating systems should improve the heat experience, be simpler to install and provide consumers with enhanced control if the UK is to meet the challenge of dramatically reducing emissions from domestic heating, according to a new report published by the Energy Technologies Institute (ETI).
Heat accounts for more than 40% of the UK’s total energy demand and heating the UK’s buildings contributes roughly 20% of overall UK CO2 emissions. But today fewer than 4% of households have low carbon heating and 90% prefer gas central heating when given the choice so low carbon systems need improving.
“Consumer Challenges for Low Carbon Heat,” written by Matthew Lipson, the Head of Consumer Insight at the Energy Systems Catapult – who are delivering the ETI’s Smart Systems and Heat (SSH) programme – is based on an extensive ETI consumer research project which has highlighted a number of issues the UK has to address if it is to change how it heats the majority of its buildings.
In the UK location constrains the heating solutions available to each building, existing buildings also have their own constraints and many homes will need modifying to make sure solutions work well. Alongside this, people are diverse and ETI’s research shows they are concerned about different things – for example cost, comfort, or health – and therefore the same solution will not suit everyone.
From this research three key consumer challenges for any transition to low carbon heating have been identified.
- There is a need to improve low carbon heating experiences by designing solutions to tackle common problems and enhance home life. Historic experience shows that widespread change in domestic heating can be achieved when new options deliver a better experience for consumers.
- Low carbon heating should be simple to prepare for and install. Workable low carbon heating solutions should be designed so they can be installed in a similar timeframe to a gas boiler. People will also need to know what will work in their area and what they need to do to prepare their homes.
Matthew Lipson said:
“The UK will need to all but eliminate emissions from domestic heating if it is to meet its carbon targets. Previous measures to reduce emissions have been relatively simple, cheap and delivered benefits but the options currently available to make further step-change reductions would require households to endure more disruption for less obvious benefits.
“We need to develop ways of reducing emissions from domestic heating that are more appealing to consumers so the transition to low carbon heating on a large scale is much easier to deliver in practice.
“Any solutions will need to be underpinned by sound engineering; high quality design; appropriate technical, consumer and economic regulation; and financially viable business models. But ultimately they will need to be appealing, simple to install and easy to control.”
The Energy Systems Catapult will deliver phase one of the SSH programme as a supplier to the ETI following the transition of the SSH programme team to the Catapult. From 2017 the Catapult will be responsible for delivery of phase two of the programme independently of the ETI.
More details on the Consumer Challenges for Low Carbon Heat Insight, including the report, video and infographics are available here